webDotWiz Online and webDotDirectory (opens in a new window) How to start... Best downloads... Hints... ConBuilder... Activities

Home
Prepare
Sites
How to
Tools
Routes
Activities
Australian
NALW
Aliasing
Information
Past news
 
 

Last Updated 19-May-2003

Manuzio to Vallo via San Bovio

You're rostered to take electric loco E464.103 to head a stop-all-stations passenger service from Manuzio to Vallo via San Bovio. At San Bovio, you'll stop at the platform and then travel around the loop to pull in at platform 3 for more passengers.

Depending on traffic at Manuzio as you set out, the platform signal may turn red just as the conductor gives you the all-clear (the signaller controller seems to set signals with the toss of a coin!).

Beware that between kilometre posts 39 and 40 after Falciono there is a dangerous piece of track and you should keep to a maximum speed of 15 kmh.


Rolling stock

Route Riter 4 was used to generate a report for this activity and formed the basis for the following list of required rolling stock. The title beginning each line is actually the folder for particular piece(s) of rolling stock. Much of the rolling stock is common to Trenomania.it and Allfreenet.it. For more help, see Italian Railways Rolling Stock.

There are no loose consists - all trains are under the control of the dispatcher/controller.

Route Riter 4 has been used to package the activity into a zip; simply extract the files, ensuring "Use folder names" is ticked in the Extract to: dialogue box.


  
Op Docs

web•Directory