Marseille - L'Estaque return
Today you're in charge of a Z5600 trainset on a morning commuter run from Marseille to L'Estaque and return, stopping all stations.
There's just the usual morning traffic.
At L'Estaque you'll need to make your stop then continue up to the bridge to the reversing point (keep moving until that little white arrow disappears from the Track Monitor).
Then run down to end #2 of your train (just press "5" will do), reverse and move to platform C to pick up passengers travelling to Marseille and stops along the way.
In end #2 you can hear your conductor but you won't hear some other sounds as you do in end #1. Use the Track Monitor to know your speed (by the way, the Z5600 is speed-limited!).
This activity can be downloaded from the web•TrainSim downloads page.
Rolling stock
If you've installed all the rolling stock required for Wolfgang Plenz's TGV activity pack for LGV Med 1.1, you have all you need. Otherwise, you'll need the rolling stock to make up the track work and local passenger trains:
- BB 67354 diesel-electric loco: 67000.zip (3.4Mb) from www.chez.com/aardvark/
- Ferrovia dello Stato (FS) Gmr box car: fs_gmr.zip (447kb, 04-Oct-01) from Train-Sim.com
- RIO 80 régionales PACA French passenger cars: riopaca3.zip (457kb, 20-May-02) from Train-Sim.com
- SNCF 040DE426 diesel loco: SNCF_040DE426.zip (848kb) from www.simtrain.dyndns.org (follow these links: Simulateur | Locomotives Diesels | Locomotives de manoeuvres)
- Heavy crane: aus_cran.zip (676kb) from train-simulator.sebastianfrey.de/ or from the author's site (Mike Simpson of Route Riter fame) as crane1.zip (but install it in the folder, aus_cran, otherwise Wolfgang's consists/loose consists won't find it)
- Trackwork wagon, loaded with track: sw100.zip (1.09Mb) from train-simulator.sebastianfrey.de/
|
